Author Topic: Speed Call on Hospitality clustered  (Read 833 times)

Offline mevans1974

  • Jr. Member
  • **
  • Posts: 45
  • Country: bs
  • Karma: +0/-0
    • View Profile
Speed Call on Hospitality clustered
« on: April 05, 2019, 10:21:17 AM »
Hi all,
I have a issue with Speed Call restriction override on on Hospitality clustered. I have 3 3300 in a clustered with 1 T1. PBX-A has the T1, PBX-B and PBX-C use the T1 of PBX-A to make and received calls. I have 3 speed call setup, Speed call 3450> 91800 555-1122 3451> 91800 555-2233 3452>>94773350. On PBX-A I can dial all 3 speed call with no issue, on PBX-B & PBX-C I can only dial speedcall 3452, However, If I change the COR on the phone to allow LD calls with out a code I can dial all 3 speed dial without any issue. The issue seems to be even with restriction override I can't not use speedcall 3450 and 3451.

Any help would be greatly appreciated.


Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 693
  • Country: us
  • Karma: +17/-0
    • View Profile
Re: Speed Call on Hospitality clustered
« Reply #1 on: April 05, 2019, 03:41:45 PM »
Are the Speed Calll Types on on B and C set to "Int"

Offline JasonTaylor

  • Full Member
  • ***
  • Posts: 122
  • Country: gb
  • Karma: +4/-0
    • View Profile
Re: Speed Call on Hospitality clustered
« Reply #2 on: April 05, 2019, 07:10:09 PM »
System options - send traveling class marks - Select "Yes" to send a caller's COS, COR and Interconnect Restriction information to other MiVoice Business systems in the cluster on network.

Offline mevans1974

  • Jr. Member
  • **
  • Posts: 45
  • Country: bs
  • Karma: +0/-0
    • View Profile
Re: Speed Call on Hospitality clustered
« Reply #3 on: April 08, 2019, 06:21:17 PM »
@ZuluAlpha- Speed call type is set to SC

@Jason- send traveling class marks  is enable in all 3 systems and still don't work


 

Sitemap 1 2 3 4 5 6 7 8 9 10