Speed Call on Hospitality clustered

[mevans1974]

Hi all,
I have a issue with Speed Call restriction override on on Hospitality clustered. I have 3 3300 in a clustered with 1 T1. PBX-A has the T1, PBX-B and PBX-C use the T1 of PBX-A to make and received calls. I have 3 speed call setup, Speed call 3450> 91800 555-1122 3451> 91800 555-2233 3452>>94773350. On PBX-A I can dial all 3 speed call with no issue, on PBX-B & PBX-C I can only dial speedcall 3452, However, If I change the COR on the phone to allow LD calls with out a code I can dial all 3 speed dial without any issue. The issue seems to be even with restriction override I can't not use speedcall 3450 and 3451.

Any help would be greatly appreciated.

[ZuluAlpha]

Are the Speed Calll Types on on B and C set to "Int"

[JasonTaylor]

System options - send traveling class marks - Select "Yes" to send a caller's COS, COR and Interconnect Restriction information to other MiVoice Business systems in the cluster on network.

[mevans1974]

@ZuluAlpha- Speed call type is set to SC

@Jason- send traveling class marks  is enable in all 3 systems and still don't work