« previous next »
Pages: [1]   Go Down

Author Topic: Noise on calls  (Read 905 times)

Offline MarwanNugdalla

  • Contributer
  • *
  • Posts: 7
  • Country: sd
  • Karma: +0/-0
    • View Profile
Noise on calls
« on: January 28, 2019, 05:55:30 AM »
Hello

We have one of our old clients using MX controller over 15 years and suddenly the system have stopped.

After checking the system we agreed to install new software manually using the hyper-terminal.

Software have been installed successfully, license retrieved back  and system data backup restored.

System has been installed back into the customer premises but we had the following issues:

1)  Noise in E1 Line both way.
2)  Noise when used music on hold bottom in the IP phones.
3)  Noise between phones (Analog to IP, IP to IP)

Note that analog to analog voice is clear.

Please support to solve the problem.

Best regards
Marwan Nugdalla
Logged

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Noise on calls
« Reply #1 on: January 28, 2019, 08:18:02 AM »
You have the protocol settings on the E1 incorrect in all probability. Change them to suit your E1.
Logged

Offline MarwanNugdalla

  • Contributer
  • *
  • Posts: 7
  • Country: sd
  • Karma: +0/-0
    • View Profile
Re: Noise on calls
« Reply #2 on: February 03, 2019, 01:57:38 AM »
But the Noise appeared in the e1 line (please note that there are 2 E1 line from different service providers) and from internal calls (IP TO IP) (IP TO ANALOG) and when used the MOH
Logged

Offline Ronan

  • Full Member
  • ***
  • Posts: 149
  • Country: fr
  • Karma: +1/-0
    • View Profile
Re: Noise on calls
« Reply #3 on: February 04, 2019, 05:01:18 AM »
DSP card issue maybe ?
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10