SIP-DECT OMM v.2.6.4

[nowickj]

hello.

Can Someone help Me, and write how to upgrade OMM v.2.6.4 to the newest version 8.0 I have 5 RFP (4x RFP32, 1x RFP34) Master and Standbay OMM are on RFP32. SIP-DECT system is associated with MiVB 8.0 SP3 PR2.

[pcourtney]

you need to upgrade your RFP's to v.4.0 and then you can upgrade to v6.02 and later

more specifically, upgrade all your RFP's to ver 4.0  ( put the file on a USB drive, make sure it is formatted FAT32)

the file is called :    iprfp3G.dnld

then once successfully updated you can upgrade to 6.2 and later

[sunspark]

hi guys ,

i'm in the same case . never work before with OMM v2.6.4 . does any one have the good process to upgrade from v2 to V7 or v8 ?

i have RFP31 and RFP32

thanks !

[pcourtney]

you need to upgrade to v4

see this  - it may help you on your way

https://sudonull.com/post/74055-How-to-make-friends-Mitel-SIP-DECT-and-Asterisk

[sunspark]

you need to upgrade to v4

see this  - it may help you on your way

https://sudonull.com/post/74055-How-to-make-friends-Mitel-SIP-DECT-and-Asterisk

thank you my friend i will check .

How i can u see if the Omm is installed on linux server our in the base station?

[pcourtney]

see page 41  -  it may help -  look for cfg files in the omm sub directory

https://www.voipinfo.net/docs/mitel/SIP-DECT_OM_DECT_Phone_Sharing_Prov_6.2_EN_2016-07-01.pdf

[pcourtney]

lots of info on this forum as well

[sunspark]

in the link below , they talk about a new configuration not an upgrade.


https://sudonull.com/post/74055-How-to-make-friends-Mitel-SIP-DECT-and-Asterisk

[pcourtney]

I know, but it might be helpful to others in years to come :-)

[sunspark]

I know, but it might be helpful to others in years to come :-)

Yes sure.
I need to uograde my mivb from v4 to v8 and i need to know if i have to upgrade also Omm or not