Author Topic: Need help - Time Controlled Function  (Read 4425 times)

Offline havard_m

  • Contributer
  • *
  • Posts: 8
  • Country: no
  • Karma: +0/-0
    • View Profile
Re: Need help - Time Controlled Function
« Reply #15 on: December 02, 2019, 06:03:19 AM »


Here's a simple example:

IDName         FunctionRepeatedStart dayStop dayExecution date and time    Switch group
1Day Mon-Fri  *85011 Enabled  Monday  Friday     08:30                            20
2Night Mon-Fri*85012 Enabled     Monday  Friday     17:30                            20

Ok, I have done this, and the switch group changes from pos 1 to pos 2 at 17:30, but not back to pos 1 the next day?

HÃ¥vard

It depends on which day you are talking about. It should switch during weekdays and be at position 2 from Friday but not back to SW pos. 1 on Saturday and Sunday in this example. It will switch to position 1 again on Monday.

Sent from my SM-G965F using Tapatalk

IDName         FunctionRepeatedStart dayStop dayExecution date and time    Switch group
1Day Mon-Fri  *85011 Enabled  Monday  Friday     11:54                            1
2Night Mon-Fri*85012 Enabled     Monday  Friday     11:56                            1

Tried this just now, went from 1 to 2, but not back?


Offline bojo387

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 241
  • Country: sg
  • Karma: +3/-0
    • View Profile
Re: Need help - Time Controlled Function
« Reply #16 on: December 02, 2019, 06:27:24 AM »
Because it's gonna switch back to position 1 11:54 the next day.

Sent from my SM-G965F using Tapatalk


Offline havard_m

  • Contributer
  • *
  • Posts: 8
  • Country: no
  • Karma: +0/-0
    • View Profile
Re: Need help - Time Controlled Function
« Reply #17 on: December 02, 2019, 06:47:27 AM »
Sorry, that came out wrong. At 12:40 the call server was in pos 1, and i programmed this:

ID   Name   Function   Repeated   Start day   Stop day   Execution date and time Switch group
1   Dag           *85011   Enabled   Monday   Friday   12:42                       1
2   Kveld   *85012   Enabled   Monday   Friday   12:41                       1

The server went from pos 1 to pos to 2 at 12:41, but not back at 12:42, am I still fooling around here?

Offline bojo387

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 241
  • Country: sg
  • Karma: +3/-0
    • View Profile
Re: Need help - Time Controlled Function
« Reply #18 on: December 02, 2019, 07:04:56 AM »
That should work.

How do you check that it does not switch back?

 


Offline havard_m

  • Contributer
  • *
  • Posts: 8
  • Country: no
  • Karma: +0/-0
    • View Profile
Re: Need help - Time Controlled Function
« Reply #19 on: December 02, 2019, 07:17:25 AM »
That should work.

How do you check that it does not switch back?

I have programmed switch pos 2 function on my 6940 that goes red when in pos 2.
Also checking config -> routing -> graphical view -> switch group

Offline bojo387

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 241
  • Country: sg
  • Karma: +3/-0
    • View Profile
Re: Need help - Time Controlled Function
« Reply #20 on: December 02, 2019, 07:27:36 AM »
Remove or change the switchgroup assignment to a higher number.  You allocated them to Switch Group 1.

Offline havard_m

  • Contributer
  • *
  • Posts: 8
  • Country: no
  • Karma: +0/-0
    • View Profile
Re: Need help - Time Controlled Function
« Reply #21 on: December 02, 2019, 09:32:56 AM »
Remove or change the switchgroup assignment to a higher number.  You allocated them to Switch Group 1.

Thanks  :)


 

Sitemap 1 2 3 4 5 6 7 8 9 10