Author Topic: Mitel 5000 Paging...Tone?  (Read 1899 times)

Offline cpegeno

  • Jr. Member
  • **
  • Posts: 76
  • Country: us
  • Karma: +0/-0
    • View Profile
Mitel 5000 Paging...Tone?
« on: August 22, 2018, 08:30:40 AM »
I have a client who has hearing issues, and about has an accident everytime someone pages over the system. His hearing aids are turned up!
He has requested that we see if a PRECURSOR TONE will go to the deskset (Mitel 5330 IP set) speaker prior to the page being broadcast.
Does MITEL do this? Where would I find this? I have wracked my brain a couple times... and cannot find it. It is probably a Captain Obvious thing, so you know how that goes!

Thanks in advance!

Geno


Offline cpegeno

  • Jr. Member
  • **
  • Posts: 76
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Mitel 5000 Paging...Tone?
« Reply #1 on: August 22, 2018, 10:40:06 AM »
On the Mitel 3300, this is called GROUP PAGING. It plays a tone prior to the page being heard on each handset.

On the Mitel MiVO250/5000, HOWEVER, I do NOT see GROUP paging as an option.

Please help!

Geno

Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2972
  • Country: us
  • Karma: +85/-1
    • View Profile
Re: Mitel 5000 Paging...Tone?
« Reply #2 on: August 22, 2018, 12:31:54 PM »
cpegeno,

That is not an option through the phones on the MiVO-250.

What you could do is have the person paging press a number key after starting the page, but before actually speaking.

Sorry,

TE

Offline cpegeno

  • Jr. Member
  • **
  • Posts: 76
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Mitel 5000 Paging...Tone?
« Reply #3 on: August 22, 2018, 02:01:31 PM »
Thanks T.E., I was thinking that would be the worse case scenario.
Silly, but would work.

I appreciate the response.

G

Offline DND ON

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 908
  • Country: us
  • Karma: +23/-0
    • View Profile
Re: Mitel 5000 Paging...Tone?
« Reply #4 on: August 22, 2018, 08:13:14 PM »
Or, remove his phone from the page zone(s).

Offline cpegeno

  • Jr. Member
  • **
  • Posts: 76
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Mitel 5000 Paging...Tone?
« Reply #5 on: August 23, 2018, 12:12:46 PM »
Not an option. He runs the business, and they page when calls are parked.

:(

Offline magnus

  • Full Member
  • ***
  • Posts: 156
  • Country: ca
  • Karma: +0/-0
    • View Profile
Re: Mitel 5000 Paging...Tone?
« Reply #6 on: September 10, 2018, 12:48:00 PM »
The other option you could consider would be getting some external paging device. I forget the name of them off hand.
You would call that extension and record your page. Then the device would send out the page with a warning tone.

This would of course require purchasing a device and SIP license and the time to configure it.

Offline DND ON

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 908
  • Country: us
  • Karma: +23/-0
    • View Profile
Re: Mitel 5000 Paging...Tone?
« Reply #7 on: September 10, 2018, 01:08:48 PM »
A simple Valcom page adapter, set up on an analog station port or trunk port. One external speaker, programmed as a member of the existing page group.

Offline cpegeno

  • Jr. Member
  • **
  • Posts: 76
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Mitel 5000 Paging...Tone?
« Reply #8 on: September 14, 2018, 03:56:11 PM »
They have an Overhead setup in their shop. This is for the office area, and I don't think they want to incur more costs.
I have a feeling that this system was explained having this over the sets tone precursor.
I haven't given up hope yet.

Thanks for your replies!

Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2972
  • Country: us
  • Karma: +85/-1
    • View Profile
Re: Mitel 5000 Paging...Tone?
« Reply #9 on: September 17, 2018, 07:11:52 AM »
cpegeno,

You know the one thing I never looked into, sadly, is if you can adjust the volume on the speaker phone specifically for pages; you may want to look into that.

Thanks,

TE


 

Sitemap 1 2 3 4 5 6 7 8 9 10