« previous next »
Pages: [1]   Go Down

Author Topic: Adding analog line with Dial Tone  (Read 832 times)

Offline KaptenBlack

  • Contributer
  • *
  • Posts: 12
  • Country: ca
  • Karma: +0/-0
    • View Profile
Adding analog line with Dial Tone
« on: July 23, 2018, 11:39:56 AM »
Hello, I got surprised with this today. We purchased a new Paging system and the installers are trying to set it up. They require an Analog line with Dial Tone and an Extension number to our Mitel 3300. I do not know the first thing required to set this up. If any one can provide some guidance that would be helpful.
Logged

Offline KaptenBlack

  • Contributer
  • *
  • Posts: 12
  • Country: ca
  • Karma: +0/-0
    • View Profile
Re: Adding analog line with Dial Tone
« Reply #1 on: July 23, 2018, 04:57:52 PM »
I solved this issue. I Configured a Analog Set, and configuring users and devices. Luckily I had a spare analog license,  Now I am working on setting up a Button on user sets to activate a specific trunk.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10