Author Topic: Delayed outgoing dial tone  (Read 1477 times)

Offline mcastle

  • Contributer
  • *
  • Posts: 19
  • Country: us
  • Karma: +0/-0
    • View Profile
Delayed outgoing dial tone
« on: July 21, 2018, 03:04:52 PM »
We have been having intermittent issues with only a certain group of phones having delayed outgoing calls. The dial tone starts ringing after 30 seconds or doesn't at all. What could be the cause of this or where can I begin trouble shooting this issue? We use SIP trunking through comcast, with our mitel 3300. Any suggestions?


Offline VinceWhirlwind

  • Hero Member
  • *****
  • Posts: 899
  • Country: au
  • Karma: +31/-0
    • View Profile
Re: Delayed outgoing dial tone
« Reply #1 on: July 22, 2018, 08:29:37 PM »
30 seconds sounds like too long to be inter-digit timeout, but you should rule that out first. Check which Digits Dialled the outgoing call is matching and make sure it is an exact match rather than n+unknown.

Offline mcastle

  • Contributer
  • *
  • Posts: 19
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Delayed outgoing dial tone
« Reply #2 on: July 28, 2018, 04:43:29 PM »
30 seconds sounds like too long to be inter-digit timeout, but you should rule that out first. Check which Digits Dialled the outgoing call is matching and make sure it is an exact match rather than n+unknown.

Digits dial are 9 follow by 7, no unknown numbers, if calling within the area code. Outside local area code they must dial 91 + 10, the inter digit timer is set to 10 seconds


 

Sitemap 1 2 3 4 5 6 7 8 9 10