I need advise, I am setting up a new system with an HP Procurve, I have set up two vlans one for the data and one for voice. I am using the Mitel built in server on vlan 2 and the customers data server on vlan 1. I have set up the tagging on the procurve and basically the ip phone will go to the default vlan 1 and option 125 will then point it to the voice vlan 2, this works OK, The handsets boot up OK. If i connect to the back of the handset I can surf the internet BUT I cannot browse to the Mitel system.
If I set a static address on my laptop and a gateway address then I can access the Mitel system but cannot surf the net.
Mitel System ip 192.168.1.2
HP 192.168.0.1
Customers Network is on 192.168.0 XXX
Gateway 192.168.0.200
Voice vlan 2 is on 192.168.1.200
Data vlan is 192.168.0.200
I can ping from Mitel system to 192.168.1.200.
Any idea's or advice welcome.