Author Topic: How to assign a RAD Greetings to a Menu Node  (Read 1219 times)

Offline HungryHippo

  • Jr. Member
  • **
  • Posts: 66
  • Karma: +0/-0
    • View Profile
How to assign a RAD Greetings to a Menu Node
« on: May 11, 2018, 03:56:46 PM »
I want to configure a voicemailbox that uses a RAD Greetings that are already setup. How do you do that? Thanks!


Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 692
  • Country: us
  • Karma: +17/-0
    • View Profile
Re: How to assign a RAD Greetings to a Menu Node
« Reply #1 on: May 14, 2018, 08:57:23 AM »
I would not typically assign a RAD to a voicemail box - as the voicemail box already has the capability of playing a recording. Can you explain a little more what you want to do?


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: How to assign a RAD Greetings to a Menu Node
« Reply #2 on: May 14, 2018, 06:11:43 PM »
If you just want the same message and the vm is embedded, you can ftp to the system and copy the rad recording and change it to a wav file and upload it to the mailbox I believe


 

Sitemap 1 2 3 4 5 6 7 8 9 10