voice processor alarm 1091

[cahrens]

The alarm has come up twice now in about a month. I found a post on another site and the suggestion was to delete the application and reprogram. Has anyone else had this problem and did delete/reprogram solve it?

[acejavelin]

The alarm has come up twice now in about a month. I found a post on another site and the suggestion was to delete the application and reprogram. Has anyone else had this problem and did delete/reprogram solve it?

1091? I am not familiar with that... VM alarms should be 020-039 or 200-224, can you double click the alarm in Sys Adm&Diag and grab a screenshot?

[cahrens]

I copied this out of the error log.

-01:514- 14:00 05-03 M1091 INF DB AL Voice Processing Unit (0):  FILE_Open failed (file=, mode=0, error=2)

[acejavelin]

I copied this out of the error log.

-01:514- 14:00 05-03 M1091 INF DB AL Voice Processing Unit (0):  FILE_Open failed (file=, mode=0, error=2)

Contact technical support...

M1091 Voice Processing Unit <error>: <message>

FIELDS:
error  Error number presented by the voice processing unit.
message  Generic message generated by the voice processing unit.

CAUSE:
This message is provided to give Voice Processing a mechanism for outputting informational messages. Refer to the Voice Processing Diagnostics Manual (part no. 550.8019) Alarm 216.

ACTION:
Depends on the message.

FSACTION:
Report the problem to the engineering contact person for further analysis.




On another note, does anyone know where to get: Voice Processing Diagnostics Manual (part no. 550.8019)

[Tech Electronics]

acejavelin,

Do you a pdf copy of it?

Thanks,

TE

[acejavelin]

acejavelin,

Do you a pdf copy of it?

Thanks,

TE

Thanks... I was able to find a copy in the 4.0 documentation set, release 11 from 2007. If you have something newer, sure.