so here is my current setup
ARS Digits Dialed vid7.31 14.0.3.19
0 1 2 3
Digits Dialed ....Number of Digits to Follow.... Termination Type.... Termination Number
1020................4............................ ....Route................12
8 ................7................................ Route................12
818XX...............7............................ ....Route................12
81NXX...............7............................ ....Route................12
8911............... 0................................Route........... .....10
8NXX................7............................ ....Route................12
9...................7............................ ....Route................20
9011................Unknown...................... ....Route................19
911.................0............................ ....Route................10
91NXX................7........................... ....Route................19
ARS Routes
Route Number COR Group Number Digit Modification Number Route Type
10....................4.........................8 05..............Emergency
12....................4.........................8 05
1
19....................1.........................1 9
20....................1.........................2 0
Class of Restriction Groups vid7.1
0 1
Number Classes Of Restriction For Group
1
4....................4
i would like to restrict international calling to assigned users only
currently all users have a CoR of 1
i am thinking i need to setup something like CoR groups, creating 2 new CoR and blocking the default.
1......................1-64 #block all by default
20....................1-19,22-64 # no international calling
21....................1-20,22-64 #interntional calling
then modify the Digits Dialed like so, assigning the 9011 to its own termination number
ARS Digits Dialed vid7.31 14.0.3.19
0 1 2 3
Digits Dialed ....Number of Digits to Follow.... Termination Type.... Termination Number
1020................4............................ ....Route................12
8 ................7................................ Route................12
818XX...............7............................ ....Route................12
81NXX...............7............................ ....Route................12
8911............... 0................................Route........... .....10
8NXX................7............................ ....Route................12
9...................7............................ ....Route................20
9011................Unknown...................... ....Route................21
911.................0............................ ....Route................10
91NXX................7........................... ....Route................19
then modify the ARS Routes like so, giving the 9011 its own ARS route
10....................4.........................8 05..............Emergency
12....................4.........................8 05
19....................19......................... 19
20....................19......................... 20
21....................20......................... 19
then assign the proper CoR to all phones in the system.
is that about right?
what happens to the Emergency route? do i need to address that also? it currently works but i think that it works because everyone is a one. should the core read more like this 1-3,5-19,22-64?
am i missing some over pitfall?