Author Topic: TFTPerr:packet recv..... reseting phone  (Read 1060 times)

Offline se2thunya

  • New Member
  • *
  • Posts: 1
  • Country: bw
  • Karma: +0/-0
    • View Profile
TFTPerr:packet recv..... reseting phone
« on: April 13, 2018, 02:23:27 AM »
Good day, i need help, i have about 4 mitel 5312 IP Phones displayin the message ::::TFTPerr:packet recv..... reseting phone.
what could be the problem, i have restored the phone to factory setting, put static IP adress, but stil the message stil comes
mie controller is Mitel 3300


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: TFTPerr:packet recv..... reseting phone
« Reply #1 on: April 13, 2018, 10:47:49 AM »
Good day, i need help, i have about 4 mitel 5312 IP Phones displayin the message ::::TFTPerr:packet recv..... reseting phone.
what could be the problem, i have restored the phone to factory setting, put static IP adress, but stil the message stil comes
mie controller is Mitel 3300
This is a network issue or corrupt files on the 3300 controller, or less likely something happened and the phones bricked/went bad...

What version of MCD software?
Are these phones local or remote, if remote by what method (MBG, VPN, etc)?
If you have a working phone that reboots fine, and replace it with one of these sets, does it boot up properly?



 

Sitemap 1 2 3 4 5 6 7 8 9 10