new here, former shoretel partner

[gabe-kts]

yea still not making any connection attempts to my ftp server

boot device          : motfcc
unit number          : 0
processor number     : 0
file name            : /sysro/E2T8260
inet on ethernet (e) : 192.168.001.002:ffffff00
host inet (h)        : 192.168.001.100
gateway inet (g)     : 192.168.1.1
user (u)             : ftp
ftp password (pw)    : ftp
flags (f)            : 0x0

[gabe-kts]

tried putting back to these settings

boot device          : motfcc
unit number          : 0
processor number     : 0
file name            : Boot_Install
inet on ethernet (e) : 192.168.001.002:ffffff00
host inet (h)        : 192.168.001.100
gateway inet (g)     : 192.168.001.001
user (u)             : ftp
ftp password (pw)    : ftp
flags (f)            : 0x0
other (o)            : FixPartition


disabled windows firewall just in case and also plugged both my laptop and the 3300 into a little switch as a test instead of plugging directly into the lan 1 port...nothing

[gabe-kts]

the controller isnt taking the VLAN_Off command. it says unrecognized command

[JasonTaylor]

Can you browse to http://192.168.1.2 and get the Mitel login page?

[JasonTaylor]

1) Connect a serial cable to the RS232 port. Open hyperterminal and connect with 9600,8,N,1.

2) Type vlan_off and press return.

3) After 30 seconds you will be able to connect to the RTC address through ESM via the layer 2 ports.

This command will not survive a reboot

[v2win]

Also get rid of the leading 00 in the IP address field.

[gabe-kts]

Can you browse to http://192.168.1.2 and get the Mitel login page?

no

[gabe-kts]

not sure if this makes a difference but this is the unit i have

http://www.americantelebrokers.com/mitel-3300-universal-controller-50002211-refurbished.html

[JasonTaylor]

It could be that port is VLAN tagging, not sure why vlan_off does not work for you although I never tried it myself.  Just come across this forum while searching which is worth a try?

http://mitelforums.com/forum/index.php?topic=3712.0

That chassis is old and we are throwing them in the bin so I hope you didn't pay that much for it.  Might be worth contacting the seller as they must have tested this working prior to selling it to you?

[lundah]

2003 vintage means you won't be able to install anything close to a current software release on it since it probably only has 256mb of RAM in it. Current software requires 512mb, though any controller made in the last year or 2 probably has 1Gb. Best you can load on it is 9.0.3.x, if you can find it, since you can't even pull that from the Software Dowloads site on Mitel Connect. If you're a Mitel partner, you should be able to get a demo kit that's actually able to run the current version for cheap.