Author Topic: ucadialer.exe - All numbers are Invalid.  (Read 994 times)

Offline micollab_question

  • Contributer
  • *
  • Posts: 5
  • Country: us
  • Karma: +0/-0
    • View Profile
ucadialer.exe - All numbers are Invalid.
« on: January 17, 2018, 05:03:01 PM »
Hello,

How should a phone number be formatted when trying to dial using uacdialer.exe from a command line?

We dial 9 to call out. I've been trying:

>uacdialer.exe + 5551234567

>uacdialer.exe + 95551234567

>uacdialer.exe + 9 + 5551234567

>uacdialer.exe + 555-123-4567

>uacdialer.exe + 9555-123-4567

etc, etc...

Any advice appreciated. Thank you!




Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: ucadialer.exe - All numbers are Invalid.
« Reply #1 on: January 18, 2018, 06:20:17 PM »
This would partly depend upon settings in the UC server those being extension length and dial prefix. It will insert the dial prefix for any length greater than the extension setting. It also will depend upon how the ars dialed digits is setup.

Generally if 10 and 11 digit dialing is set then it is ucadailer.exe 10 or 11 digits for external assuming uc server has the required outbound leading digit. The software will ignore the - between the string. Don't know what the + does for you.



 

Sitemap 1 2 3 4 5 6 7 8 9 10