trunk related info - Call Routing Tables- Call Routing key -Outside Party Number

[Crowtalks]

I was looking at one of my systems and I noticed under System - Trunk Related Info - Call Routing Tables- Call Routing key, it shows an option for Outside Party Number. F1 says this routes the calls according to calling party CLID instead of called number CLID.

Where would a person populate that info in the system?

Jim

[DND ON]

In the associated Call Routing Table, same as routing by DID.

[NTEDave]

Instead of a DDI you would enter the outside parties CLI and route accordingly.

Enter the E and + at the bottom routing to your normal Call Routing Tables.

Set the Day or Night Destination on your trunk groups to route to this Call Routing Table.

[magnus]

This is commonly used to block problem numbers. You just route the call to a CRA to hang up.