Author Topic: trunk related info - Call Routing Tables- Call Routing key -Outside Party Number  (Read 1917 times)

Offline Crowtalks

  • Sr. Member
  • ****
  • Posts: 282
  • Country: us
  • Karma: +8/-0
    • View Profile
I was looking at one of my systems and I noticed under System - Trunk Related Info - Call Routing Tables- Call Routing key, it shows an option for Outside Party Number. F1 says this routes the calls according to calling party CLID instead of called number CLID.

Where would a person populate that info in the system?

Jim


Offline DND ON

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 908
  • Country: us
  • Karma: +23/-0
    • View Profile
In the associated Call Routing Table, same as routing by DID.

Offline NTEDave

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 502
  • Country: gb
  • Karma: +11/-0
    • View Profile
Instead of a DDI you would enter the outside parties CLI and route accordingly.

Enter the E and + at the bottom routing to your normal Call Routing Tables.

Set the Day or Night Destination on your trunk groups to route to this Call Routing Table.


Offline magnus

  • Full Member
  • ***
  • Posts: 156
  • Country: ca
  • Karma: +0/-0
    • View Profile
This is commonly used to block problem numbers. You just route the call to a CRA to hang up.


 

Sitemap 1 2 3 4 5 6 7 8 9 10