Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - TYTEL

Pages: [1] 2 3
1
MiVoice Office 250/Mitel 5000 / Re: mitel hx 5000 10 digit local dialing
« on: May 25, 2018, 12:26:55 PM »
After you listen to your vm message it gives you the option to do a return call to the person who left the message from the recieved caller ID.
pct

2
MiVoice Office 250/Mitel 5000 / mitel hx 5000 10 digit local dialing
« on: May 25, 2018, 11:53:05 AM »
I have a mitel hx 5000 and when dialing option 2 from vm to do a return call dials a 1 before dialing the 10 digit local number and gets a recording from the CO saying you do not have to dial a 1 before dialing a local number.
pct

3
MiVoice Office 250/Mitel 5000 / inter tel 5000 (cabinet Display)
« on: August 20, 2017, 02:43:12 PM »
Is there a way to have the display in an (interel 5200 cabinet) to lightup.
Everything works in the display but does not light up.
thanks
pct

4
MiVoice Office 250/Mitel 5000 / Re: inter tel 5000 DEI
« on: August 10, 2017, 03:42:29 PM »
OK all is working swapped out DEI and 5000 cabinet swapped flash card & sw key into new cabinet everything came back up on line.
pct

5
MiVoice Office 250/Mitel 5000 / Re: inter tel 5000 DEI
« on: August 10, 2017, 09:22:37 AM »
Tried a know working DEI cable.
pct

6
MiVoice Office 250/Mitel 5000 / Re: inter tel 5000 DEI
« on: August 09, 2017, 04:28:49 PM »
OK here is the rest of the story, sorry I did not supply the following I tried another know working DEI with the 5000 cabinet server with the same results
DEI flashes busy and the station card flashes busy.
This leads me to think I have an issue with both the server cabinet and the DEI.
Just want to get this confirm before driving back out to the customer location with another server cabinet and DEI.
Maybe the processor card.This happened after a bad storm and assume was caused by lightning.
Thanks
pct

7
MiVoice Office 250/Mitel 5000 / inter tel 5000 DEI
« on: August 09, 2017, 03:16:32 PM »
I have a intertel 5000 2.2 SW that will not come on line,during reboot I get a DEI ok in the display.
The power light on the DEI is on but the light on the DIE and the 16 port station flash busy.The 5000 server comes up and works along with the voicemail as the A/A will answer calls and route calls to vm boxes.I have tried the DEI on another 5000 cabinet server and same results.From what I can tell there is a problem with the DEI and the 5000 server cabinet both.
Thanks
pct

8
MiVoice Office 250/Mitel 5000 / Re: Inter tel 5000
« on: April 11, 2017, 03:00:13 PM »
OK thanks can I go down from 2.4 software to the 2.2 and not lose my license on the 2.2?
Thanks
pct

9
MiVoice Office 250/Mitel 5000 / Inter tel 5000
« on: April 11, 2017, 01:39:41 PM »
Inter tel 5000 with major alarm and DSP failure in server display?
2.2 SW.
Thanks
pct

10
MiVoice Office 250/Mitel 5000 / 3.2 console software installed on inter tel axxess 7.0
« on: March 04, 2017, 08:38:22 AM »
I have been trying to get Mitel 3.2 console software to work on intertel axxess with 7.0 software.The console works great on my inter tel 5000 with 2.2 software.I have premium features programmed for OIA events & OIA third party control with serial port programmed for OIA on the axxess system.
Can not get phone system to connect with computer with the console software.Have wired serial port with pin outs from inter tel 7.0 install manual.
Have a transceiver to convert the RS 232 output to TCP/IP for network connection to console computer.
Am I missing something?
Thanks
pct

11
MiVoice Office 250/Mitel 5000 / Re: mitel console software
« on: February 01, 2017, 07:59:58 AM »
Ok thanks I read that it would take some type of server to convert the out put of the Axxess Cpu to TCP/IP I have a Lantronix UDS 10 which will convert the 232 port TCP/IP port.Does anybody know if the UDS 10 will work to get the Axxess system and the console computer integrated.
Thanks for all the info.
pct

12
MiVoice Office 250/Mitel 5000 / Re: mitel console software
« on: February 01, 2017, 06:42:47 AM »
I have the console up and working what I am trying to get working is the CT gateway/apps & switch transceiver so I can get the console installed on an old intertel Axxess system with 7.0 software.Do I need another Software dongle to turn on the Gateway?I know I need a switch to convert the RS232 port on the Axxess to TCP/IP.Just need to get the phone system connected to computer with the console software.
Thanks
pct

13
MiVoice Office 250/Mitel 5000 / Re: mitel console software
« on: January 31, 2017, 01:47:08 PM »
Attendant console 3.2 installing on windows 10 but have also tried on windows xp but get Hasp key not detected.
Thanks
pct

14
MiVoice Office 250/Mitel 5000 / mitel console software
« on: January 31, 2017, 12:22:20 PM »
I have the atandant console and software on a cd along with the usb software dongle.In trying to install the CT gateway/Apps and switch transceiver it
keeps telling me that the 827.9129 dongle hasp key is not detected.
When I look in device manager the hasp key shows that it is installed and working.
Help
Thanks
pct

15
MiVoice Office 250/Mitel 5000 / Re: Interel 5200 voice back up
« on: December 12, 2016, 01:32:57 PM »
Thanks that worked well.
pct

Pages: [1] 2 3