Author Topic: Sip ATA connected to faxfinder  (Read 958 times)

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Sip ATA connected to faxfinder
« on: February 22, 2017, 06:44:38 PM »
Anyone tried this type of connectivity? This is more about inbound routing by setting the sip extensions in a voicemail hunt group. A coworker tried this on a vMCD and they got no dtmf after answer.

Further thinking, perhaps Mitel design to a sip device in a vm hunt group looks for the forward info. I was hoping Ralph might have some thoughts.

Additional thoughts would be to try a loopback trunk and send <E> after a <T> with sufficient timeout value.

« Last Edit: February 22, 2017, 07:27:01 PM by johnp »


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Sip ATA connected to faxfinder
« Reply #1 on: February 22, 2017, 10:25:10 PM »
I suspect you won't be able to gen DTMF after the VM picks up like you would with an ONS line.
I think you're correct that the only way to make it happen would be to use a loop back.  Even then, timing may be tough to get right.

Ralph


 

Sitemap 1 2 3 4 5 6 7 8 9 10