« previous next »
Pages: [1]   Go Down

Author Topic: transport or codec mismatch  (Read 2636 times)

Offline small_eyes

  • Jr. Member
  • **
  • Posts: 85
  • Karma: +0/-0
    • View Profile
transport or codec mismatch
« on: July 13, 2016, 04:16:33 AM »
Hi, I used third party SIP vendor to route a did number provide to them forward to our PBX via SIP, I think they are using G729 code..and  mITEL 3300 USING g711..i guess.

there is no sounds when call to that did number...and I see transport or codec mismatch on mitel log..how can I resolve ?
Logged

Offline johnkeri

  • Jr. Member
  • **
  • Posts: 56
  • Country: ca
  • Karma: +2/-0
    • View Profile
Re: transport or codec mismatch
« Reply #1 on: July 13, 2016, 10:13:44 AM »
The codec is negotiated during the call setup over SIP. the MCD works on that principle and does support G.729 as it does G.711 and both A or U (mu) law.

To run packet capture in a newer releases lookup maintenance command SIP Tcpdump On/Off in the built in help system.
Logged

Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: transport or codec mismatch
« Reply #2 on: July 14, 2016, 06:51:38 PM »
Quote from: johnkeri on July 13, 2016, 10:13:44 AM
The codec is negotiated during the call setup over SIP. the MCD works on that principle and does support G.729 as it does G.711 and both A or U (mu) law.

To run packet capture in a newer releases lookup maintenance command SIP Tcpdump On/Off in the built in help system.
In order to run G.729 you have to have compression licences on the system otherwise G.729 isn't available and wont be offered in the SDP.
Logged

Offline small_eyes

  • Jr. Member
  • **
  • Posts: 85
  • Karma: +0/-0
    • View Profile
Re: transport or codec mismatch
« Reply #3 on: July 15, 2016, 03:22:11 AM »
the license count by each SIP using ?
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10