Inward Dialing Modification Tutorial

[x-man]

Something programmed in trunk attributes re the SIP trunk  for absorb and insert....?

[ralph]

To make this work you have to match all the digits you need to analize.
For example:  if the number is 44+11122233344
Your program would look like this:

Digits to match:  44xxxxxxxx
Digit length operator:  12
Number of digits to 2

Ralph

[PC77375]

X-man, I was thinking the same thing. Maybe also post a screenshot of the trunk attributes form? I would also look at doing a ccs trace and monitoring the maintenance command window while making a test call in from my mobile phone to see what the actual RAW CLID looks like.

[PC77375]

So looking at my inward dialing modifcation. We receive 4 digit DID from telco and in modifying the destination we do the following to add "21" to make it complete 6 digit.

Digits to Match: 8xxx
Digit Length Operator: undefined
Digit Length: 4
Number of digits to absorb: 0
Digits to be inserted: 21

So assuming that the SIP inward dialing modification uses the same rules, then as Ralph said- analyze the entire number and use "x" as placeholder.

Digits to Match: 44xxxxxxxxxx
Digit Length Operator: undefined
Digit Length: 12
Number of digits to absorb: 2
Digits to be inserted: 0

[WGAIT]

Thank you, I will try this tomorrow.

[ralph]

I don't think you want to insert a 0.
I think you need to leave it blank unless you want to see a 0 there.

Ralph

[VinceWhirlwind]

Thanks for your help, screenshots of the two forms attached.  You will see we have 3 SIP peer profiles but I have applied the Inward Dialing Modification to each profile.

Incidentally, when a call comes in it displays '447777012345' but as soon as the handset is picked up, the display changes to '9012345'

It seems to strip the first 6 digits and insert a 9, this is something else that's been happening since the software upgrade.

What about this form:
Direct Inward Dialing Service
?