Hello there,
I have a MiVoice Office 5000 running version 6.0 SP3 PR3. Our MAS server is running the Mitel Unified Communication Application which runs the UCA App on the IPhones. All traffic is internal to the network and are all on the same IP range as the PBX and the MAS.
We were running about 6 SIP soft phones on Mitel's IPhone app and they were working fine until recently.
Now i am unable to get them to register with the PBX. They only seem to timeout and are not rejected.
At the same time, our UC360 conference Phone also began to fail to register as well.
No network changes have occurred, but the phones no longer function.
I have deleted one of the SIP phones and tried recreating them, with no effect.
When i do a wire shark capture, i do not see any SIP traffic.
I also tried connecting the UC360 directly to the AUX port on the 5000 with a POE injector to see if i could get it to register.
While the Phone connects to the DHCP and time Server, we still get nothing for registrations.
Anybody know why this might stop working, and what else i can try to to figure this out?
Thanks