Author Topic: Correcting SDS errors (Read 1917 times)

smack · « **on:** January 11, 2016, 10:56:16 PM »

Hi all,

Just set up a Cluster of 2 Controllers and a Micollab server. On synchronizing them all I get the following error appearing in the reconcile wizard of the MiCollab server.

"Error: Failed to retrieve application data from the database."

This happens on each of the controllers to the server.

Looking through the documentation I can't find anything that points to what could be causing this problem.

has anyone encountered it or had similar issues?

Cheers

sarond · « **Reply #1 on:** January 12, 2016, 05:19:59 AM »

What versions?

smack · « **Reply #2 on:** January 12, 2016, 05:00:29 PM »

Both Controllers are 13.2.0.17. MiCollab

MiCollab 7.0.0.95
Mitel Standard Linux 10.3.34

johnp · « **Reply #3 on:** January 12, 2016, 06:30:27 PM »

Might be your login info doesn't have the necessary rights. Just thinking of possibilities

sarond · « **Reply #4 on:** January 12, 2016, 08:26:40 PM »

I know there was sync issues between certain versions of MiCollab and MCD.
It had to do with certificates.
I don't think it affects your versions though.

smack · « **Reply #5 on:** January 13, 2016, 04:55:52 PM »

Yea I have come across the version problem before. This is something different and, surprise surprise, barely documented...

I will drop a ticket in to Mitel support and see what they say. Will report back anything I find.

Thanks guys

Mitel Forums - The Unofficial Source

News:

Author Topic: Correcting SDS errors (Read 1917 times)

smack

Correcting SDS errors

sarond

Re: Correcting SDS errors

smack

Re: Correcting SDS errors

johnp

Re: Correcting SDS errors

sarond

Re: Correcting SDS errors

smack

Re: Correcting SDS errors