Author Topic: extension not available only at some branches?  (Read 1939 times)

Offline dan231

  • Sr. Member
  • ****
  • Posts: 338
  • Country: us
  • Karma: +0/-0
    • View Profile
extension not available only at some branches?
« on: September 14, 2015, 11:34:21 AM »
Any idea why an extension would not be available when called from a different branch location?
At the site it's created from, its fine, at others it states it is not avaialble


Offline DND ON

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 908
  • Country: us
  • Karma: +23/-0
    • View Profile
Re: extension not available only at some branches?
« Reply #1 on: September 14, 2015, 12:27:26 PM »
Do a full import/export of all nodes, make sure it appears in the database.

Offline dan231

  • Sr. Member
  • ****
  • Posts: 338
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: extension not available only at some branches?
« Reply #2 on: September 14, 2015, 12:33:56 PM »
OK, now we are getting somewhere!
This ext is NOT in that branch db.

How do I perform a db import?

Offline Camoron

  • Jr. Member
  • **
  • Posts: 41
  • Country: us
  • Karma: +1/-0
    • View Profile
Re: extension not available only at some branches?
« Reply #3 on: September 14, 2015, 12:41:06 PM »
Hi,

From within database programming you need to go to the top and click Tools > Operations > and then Import/Export. From there, select which system node you want to import FROM (meaning, you will get that node's extensions) then clear all of the check boxes except for the ones you want (i.e. Phones/Stations) and then perform the import. It's a good idea to do this for every node on the network to make sure all of the extensions are the same across all systems.

Offline DND ON

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 908
  • Country: us
  • Karma: +23/-0
    • View Profile
Re: extension not available only at some branches?
« Reply #4 on: September 14, 2015, 12:56:12 PM »
Hi,

From within database programming you need to go to the top and click Tools > Operations > and then Import/Export. From there, select which system node you want to import FROM (meaning, you will get that node's extensions) then clear all of the check boxes except for the ones you want (i.e. Phones/Stations) and then perform the import. It's a good idea to do this for every node on the network to make sure all of the extensions are the same across all systems.

Do a full import/export. If you're missing phones, something else could also be missing.

Offline dan231

  • Sr. Member
  • ****
  • Posts: 338
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: extension not available only at some branches?
« Reply #5 on: September 14, 2015, 12:58:38 PM »
Hi,

From within database programming you need to go to the top and click Tools > Operations > and then Import/Export. From there, select which system node you want to import FROM (meaning, you will get that node's extensions) then clear all of the check boxes except for the ones you want (i.e. Phones/Stations) and then perform the import. It's a good idea to do this for every node on the network to make sure all of the extensions are the same across all systems.

That looks like it worked.  Thank you very much!

Offline dan231

  • Sr. Member
  • ****
  • Posts: 338
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: extension not available only at some branches?
« Reply #6 on: September 14, 2015, 12:59:05 PM »
Do a full import/export. If you're missing phones, something else could also be missing.

Will do!  Thanks


 

Sitemap 1 2 3 4 5 6 7 8 9 10