Adtran T-Watch Pro Software

[ralph]

I'm looking for some very old software.
Adtran T-Watch Pro.

Would anyone happen to have a copy?

Ralph

[johnp]

Might have T-Watch at home. Will look later and let you know

[ralph]

Awesome! 
Thanks.
Ralph

[johnp]

Not seeing it, although it may pop up. I know I had it somewhere but may have purged it.

[ralph]

Alright.
Thanks for looking.

Ralph

[johnp]

Had it for years and never really ever used it. What do you need it for?

[ralph]

I picked up an Adtran 120 that I need to put in line with a T1 because of some voltage issues.
One of the tech I work with suggested monitoring it with T-Watch Pro software in order to see if we could see any issues on either side of the T1.   I'm not sure what the software will show but I'd thought we'd give it a try.
If you know of some open source software that will show us anything please let me know.

Ralph

[johnp]

Got ya, you would need a modem connected or local pc. BTW if you need a test 120 or 600, have a couple in my home lab, got a few aces too, some 600 and 900 units also.

[ralph]

I bought a 120 off of Amazon. We will statically set the IP address. Won't need a modem.



Sent from my iPhone using Tapatalk

[johnp]

Then it's a 120e. I also have a 550 with 5 ti ports that comes in handy

[JasonTL]

not sure if you are still looking for this, but I came across it on Adtran's site searching for something else.

http://www.adtran.com/pub/Library/Software_Tools_Firmware/Public/Utilities_Software/T_Watch_HTML_instructions.html

[ralph]

Thanks Jason,
What I needed it for was to try and capture the signalling bits when a T1 channel was seized.
It doesn't appear that T-Watch Pro would have done that for me anyways.

I ended up coming up with another solutions with a different Adtran product and Kiwi Syslog server.
This should end the finger pointing that I have going on with a carrier and me.

Ralph

[johnp]

I would also add that the software link is for an upgrade, you need to have it already installed