« previous next »
Pages: [1]   Go Down

Author Topic: 5330 with wireless handset trying to send flash hook when answering call  (Read 1853 times)

Offline berkley

  • Jr. Member
  • **
  • Posts: 60
  • Country: us
  • Karma: +0/-0
    • View Profile
5330 with wireless handset trying to send flash hook when answering call
« on: May 16, 2015, 03:39:03 PM »
I have a mitel 5000 with 5330 ip keysets. Currently, I have four with wireless handsets installed. All four try to do a flash hook when a call rings the extension. When the extension rings, and you lift the handset it says flash hook disallowed. Then a f shows in the display and the call is connected.

Any help would be appreciated.
Logged

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: 5330 with wireless handset trying to send flash hook when answering call
« Reply #1 on: May 16, 2015, 03:53:57 PM »
All four are doing this?!?!

Is there anything programmed in the House Phone field in each phone?
Logged

Offline DND ON

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 908
  • Country: us
  • Karma: +23/-0
    • View Profile
Re: 5330 with wireless handset trying to send flash hook when answering call
« Reply #2 on: May 16, 2015, 04:17:32 PM »
Reseat the module on the back of the phone.
Logged

Offline berkley

  • Jr. Member
  • **
  • Posts: 60
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: 5330 with wireless handset trying to send flash hook when answering call
« Reply #3 on: May 17, 2015, 12:09:51 PM »
Ill check the house phone. Also will reseat them. Thanks. Ill let you know what I find.
Logged

Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2983
  • Country: us
  • Karma: +89/-1
    • View Profile
Re: 5330 with wireless handset trying to send flash hook when answering call
« Reply #4 on: May 17, 2015, 06:55:29 PM »
Berkley,

This is a known issue in early versions of 6.0 and was fixed in later versions, but I can't remember which on off the top of my head. Just take the customer to the latest version of 6.0 and your problem will go away.

Thanks,

TE
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10