Author Topic: UCA preferential contacts not working  (Read 1463 times)

Offline Wollondilly

  • Contributer
  • *
  • Posts: 9
  • Country: au
  • Karma: +0/-0
    • View Profile
UCA preferential contacts not working
« on: May 15, 2015, 04:04:15 AM »
I'm currently running a 3300 controller with UCA (MiCollab) v6.0.422.0 and am trying to configure the preferential contacts on a particular status.

Basically I want to be able to forward all calls to voicemail except my team - I still want to receive calls from them.
I know that preferential contacts don't work without "Desk phone" being selected in the "Send my calls to" so I have ticked that.
I then applied a preferential contact rule to "everyone"; send to: Voicemail; condition: immediately. I then tested calling my deskphone and it rings - there is no forward at all.
I have also tried placing a specific extension to divert to another extension as a test, same deal the preferential contacts are ignored.
I suspect that there is a COS somewhere that I have not enabled that is required to allow the preferential contacts but I don't know what it is.

Has anyone else had this issue, or ideally does anyone know how to fix it?

Regards
Luke


Offline Wollondilly

  • Contributer
  • *
  • Posts: 9
  • Country: au
  • Karma: +0/-0
    • View Profile
Re: UCA preferential contacts not working
« Reply #1 on: May 21, 2015, 02:32:42 AM »
Still no go with preferential contacts. I cannot find any COS that might be causing these to not function.
I'm hoping someone has a quick, oh you just need to do this for me.
Regards
Luke


 

Sitemap 1 2 3 4 5 6 7 8 9 10