Author Topic: Cant get two ICP 3300 to communicate after reboot  (Read 1661 times)

Offline roglewjam

  • New Member
  • *
  • Posts: 1
  • Country: jm
  • Karma: +0/-0
    • View Profile
Cant get two ICP 3300 to communicate after reboot
« on: March 28, 2015, 03:03:30 PM »
I have two ICP3300 that were connected via a site to site VPN. These were communcating fine and calls were being routed.
After rebooting one of the systems we cannot get them to establish a connection.
We can PING and TRACERT successfully between both systems but the RMESS VERIFY PBX LAN command from both sides fail with
a "Open Timeout", "Failed to connect to PBX number".

We can also telnet, telnet to port 1066 and port 1067 using laptops from both networks that the PBXs are on.

I am at wits end as to what could be causing the two systems to communicate. The IP trunk settings seem fine.

Would appreciate any help or suggestions. Thanks.


 

Sitemap 1 2 3 4 5 6 7 8 9 10