« previous next »
Pages: [1]   Go Down

Author Topic: Maintenance command  (Read 2030 times)

Offline bpone

  • Jr. Member
  • **
  • Posts: 41
  • Country: gr
  • Karma: +0/-0
    • View Profile
Maintenance command
« on: March 19, 2015, 08:25:03 AM »
Hello
is there any maintenance command to show the installed RAM on the 3300 controllers?
Thanks in advance.

     BR/John
Logged

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: Maintenance command
« Reply #1 on: March 19, 2015, 08:50:00 AM »
Not sure about maintenance commands but you can find the size of RAM installed under the 'Hardware Compute Cards' form.
Logged

Offline bpone

  • Jr. Member
  • **
  • Posts: 41
  • Country: gr
  • Karma: +0/-0
    • View Profile
Re: Maintenance command
« Reply #2 on: March 19, 2015, 08:59:05 AM »
Sarond
thanks very much.
 :)
Logged

Offline august

  • Sr. Member
  • ****
  • Posts: 258
  • Country: ca
  • Karma: +9/-0
    • View Profile
Re: Maintenance command
« Reply #3 on: March 19, 2015, 04:44:04 PM »
You will see it if you click about at the top right corner.
Logged

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Maintenance command
« Reply #4 on: March 19, 2015, 04:53:11 PM »
Quote
You will see it if you click about at the top right corner.

This might only work if you have a current version of MCD running. Which would mean 512 installed. Sarond's method is what I'd do on an older version of 3300 software
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10