« previous next »
Pages: [1]   Go Down

Author Topic: Creating a DID to route directly to a voicemail box  (Read 1609 times)

Offline mkrneta

  • Contributer
  • *
  • Posts: 6
  • Country: us
  • Karma: +0/-0
    • View Profile
Creating a DID to route directly to a voicemail box
« on: September 11, 2014, 10:49:23 AM »
This may be a simple task, but I am a newby on creating this task. 
I need to assign a DID number to directly go to a voicemail box.  Can anyone provide me with instructions on this task ??
I originally created a phantom ext and then assigned that phantom in the call routing table to this new phantom.  I then added a forwarding path to VOICEMAIL.  This did not work.
Not sure where I made the mistake.
Any assistance greatly appreciated
Logged

Offline dwayneg

  • Hero Member
  • *****
  • Posts: 612
  • Country: us
  • Karma: +29/-1
    • View Profile
Re: Creating a DID to route directly to a voicemail box
« Reply #1 on: September 11, 2014, 10:55:27 AM »
You're on the right track, I often do it that way.  Phantom ext must have matching mailbox.  Phantom should have a SYS FWD path to vmail, and should have IMMEDIATE flag turned on (double-click icon by fwd path to reach flags).
Logged

Offline Hovus

  • Jr. Member
  • **
  • Posts: 77
  • Country: us
  • Karma: +3/-0
    • View Profile
Re: Creating a DID to route directly to a voicemail box
« Reply #2 on: September 11, 2014, 11:44:01 AM »
Or create a Call Routing Announcement in Voice Processors > Devices > Applications, delete the Day / Night Greetings, and set the Timeout action to Transfer to Mailbox - (Mailbox #). Point your DID to the CRA and you're done.
Logged

Offline mkrneta

  • Contributer
  • *
  • Posts: 6
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Creating a DID to route directly to a voicemail box
« Reply #3 on: September 11, 2014, 01:11:14 PM »
Brilliant -
Thank you both for your assistance !
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10