Author Topic: Tie trunks (Read 7783 times)

Mattmayn · « **on:** October 29, 2009, 12:33:41 PM »

I am attempting to connect a 3300 Mxe running MCD 4.0 with a Nortel Option 11 using PRI. Not being successful any suggestions?

ralph · « **Reply #1 on:** October 29, 2009, 04:41:47 PM »

Should work via qsig if your Nortel software is at a version that supports it.
If not, a straight T1 with Digital E&M will work.

Ralph

Mitel100 · « **Reply #2 on:** October 29, 2009, 04:44:15 PM »

What PRI setup have you got running,I would recommend QSIG. as I have seen this working fine Also, what problems are you experiencing with the setup?

v2win · « **Reply #3 on:** October 29, 2009, 10:05:18 PM »

I had ours in the office running as NI2 with the 3300 as master.

The only problem I had was getting the clocks to sync.

Mattmayn · « **Reply #4 on:** October 30, 2009, 07:49:44 AM »

We were able to get a link with QSIG but the D-Channel would not come up.

v2win · « **Reply #5 on:** October 30, 2009, 11:09:07 AM »

Who is master and who is slave.

I had a similar problem one the clock on the Nortel synced up the D channel came up.

Mattmayn · « **Reply #6 on:** November 02, 2009, 10:35:24 AM »

D-channel is now up.

NI2 I'm (3300) the master.

Getting Call Barred on display, what causes this?

ralph · « **Reply #7 on:** November 02, 2009, 11:50:43 AM »

Called barred can be caused by the 3300. COR is not correct or in COS the Public Connection is not allowed.

Ralph

Mattmayn · « **Reply #8 on:** November 02, 2009, 12:07:37 PM »

I have no COR and the COS has public-to-public

v2win · « **Reply #9 on:** November 02, 2009, 12:41:34 PM »

public network access via dpnss

Mattmayn · « **Reply #10 on:** November 02, 2009, 01:25:19 PM »

check, I was lazy and didn't type out the options. Sorry.

v2win · « **Reply #11 on:** November 02, 2009, 02:38:41 PM »

interconnect restriction?

Mattmayn · « **Reply #12 on:** November 02, 2009, 03:12:13 PM »

SOLVED! Nortel tech finally listened to my QSIG request and it works.

v2win · « **Reply #13 on:** November 02, 2009, 06:35:15 PM »

Mexico or India?

Mattmayn · « **Reply #14 on:** November 03, 2009, 10:26:50 AM »

Mitel Forums - The Unofficial Source