Import from 3300 Embedded to NuPOint

[bluewhite4]

I seem to recall their being a previous discussion on this topic, but couldn't locate it.

Is there a way to import mailboxes, greetings, and saved messages from an embedded 3300 voicemail to a NuPoint?

[ralph]

I'm highly doubting that is possible.

Ralph

[martyn]

If there is then that would be great, though I wish I knew about it before.

But as far as I am aware the answer is no.

[acejavelin]

There kind of is, I went through this last year, but the only thing you can import really is mailbox and names, everything else has to manually setup. You export the Mailboxes from the 3300 as a CSV file, then copy the mailbox and name columns into a new file and add the fields the Nupoint needs to import mailboxes. I don't have my notes or anything here, but I am pretty sure if you took the class for Nupoint it was a little section in the student guide.

[ralph]

 A long time ago I wrote a Procom script that would do something similar when in telnet mode.

Ralph

[markyb73]

i have a job coming up which means i have over 1000 embedded users to get into voicemail and i plan to import the lot with spreadsheets, all the other options can be range programmed probably.
I just need to out how to do it again, whether i actually wrote it down the first time!

[LoopyLou]

No there is no way to move content from the embedded to a Nupoint other then maybe the mailbox numbers and names.

Importing Mailbox Data from the 3300 ICP EMEM System
You can also migrate voice mailboxes from a 3300 ICP embedded voice mail system (EMEM)
to automatically create mailboxes on a NuPoint system. In this case, the .CSV file is exported
from the 3300 ICP using the System Administration Tool.
This process imports the following mailbox data:
• Mailbox number (mandatory)
• Mailbox name (optional)
• Extension number (optional)
• Attendant (or Operator) Extension (optional)
Import Procedures
Third Party Systems
To import mailboxes:
1. Save the mailbox data file you created on your local system and then use an FTP application
to transfer the mailbox data file to NuPoint (/root or to a selected directory).
2. Access Text Console and connect to the NuPoint UM node.
3. Log in as "root" and type the root password. The root password may be the same as the
administrator password. For more information, see“Text Console” on page 133.
4. From the command line, run the Import Mailboxes utility using the following command
syntax:
import_mailboxes <filename.csv> or <filename.tsv>
5. Proceed to “Processing Mailbox Data” .
3300 ICP EMEM
To migrate 3300 EMEM mailboxes:
1. Use the 3300 System Administration Tool to export a .CSV file (only) of mailbox information
from the 3300 ICP.
Note: For MAS deployments, see the Migration procedure in the MAS Installation and
Maintenance Guide

[markyb73]

thanks