I failed an upgrade from 8.0 to 10 and am going through the manual process - everything loaded, but I'm stuck here:
[ OK ] Listening on sshd.socket.
**** resetBus: no slave detected after bus reset.
Wind River Linux 8.0.0.34 10.111.2.10 ttyS0
Installation in progress!!!
DO NOT POWER DOWN OR REBOOT THE SYSTEM!!!
10 login: **** resetBus: no slave detected after bus reset.
**** resetBus: no slave detected after bus reset.
**** resetBus: no slave detected after bus reset.
**** resetBus: no slave detected after bus reset.
**** resetBus: no slave detected after bus reset.
And I can't seem to get it past this point.
