Programing Night mode on mitel 5000

[Nate9125]

Hi, how do i program  a night mode feature so when activated  can forward all incoming calls to that extension number to another extension number.
 I've already programmed the night ring key on the IP phone.

[acejavelin]

Night Mode is used to change the ringing destination of trunks, not phones... How it is programmed varies based on your type of trunks (analog or PRI/SIP). Analog trunks, you just set a different destination in trunk group, for PRI/SIP DID's you have a second CRT that is used for Night Mode (Ie. 1 for day and 2 for night) and you only put the ones that are different in 2, and as the last entry you point it back to 1.

[Nate9125]

Okay got it, i have analog trunks.