Author Topic: SIP error message Not Enough License in PBX  (Read 3102 times)

Offline Lock

  • Contributer
  • *
  • Posts: 5
  • Country: pg
  • Karma: +0/-0
    • View Profile
SIP error message Not Enough License in PBX
« on: April 02, 2020, 09:18:03 PM »
Hi Team,

One of my SIP Terminals is showing the error message on the LED Display.

Error. Not Enough license in PBX.

I cannot call or receive calls from that SIP Extension.

HELP!!



Offline Magpye

  • Full Member
  • ***
  • Posts: 134
  • Country: gb
  • Karma: +10/-0
    • View Profile
Re: SIP error message Not Enough License in PBX
« Reply #1 on: April 03, 2020, 04:18:24 AM »
Are there enough sip extension licenses on the phone system?

If they are concurrent, maybe this one was last to connect and all the licenses are in use?

Offline Lock

  • Contributer
  • *
  • Posts: 5
  • Country: pg
  • Karma: +0/-0
    • View Profile
Re: SIP error message Not Enough License in PBX
« Reply #2 on: April 03, 2020, 07:15:50 PM »
I have about 95 sip extensions on the network. And yes that particular extension may have connected last when all the other licenses were used up.
How do i check whether i have enough licenses available?? I am using Mitel 470 as a communications server.

Offline Magpye

  • Full Member
  • ***
  • Posts: 134
  • Country: gb
  • Karma: +10/-0
    • View Profile
Re: SIP error message Not Enough License in PBX
« Reply #3 on: April 06, 2020, 05:20:59 AM »
I'm not familiar with the 470, but one of the other forum users should be able to advise.

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1213
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: SIP error message Not Enough License in PBX
« Reply #4 on: April 06, 2020, 07:04:30 PM »
Try asking in the Aastra forum, this board covers the old legacy Mitel stuff.

Offline bojo387

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 239
  • Country: sg
  • Karma: +3/-0
    • View Profile
Re: SIP error message Not Enough License in PBX
« Reply #5 on: April 09, 2020, 07:37:13 AM »
@Lock, what is your PBX software version? Do you use AMS or WebAdmin Access?


Offline Lock

  • Contributer
  • *
  • Posts: 5
  • Country: pg
  • Karma: +0/-0
    • View Profile
Re: SIP error message Not Enough License in PBX
« Reply #6 on: May 05, 2020, 06:06:53 PM »
@bojo387  sorry for the late reply.

My PBX software version is

System software
                                                       Application                                           Boot
Version                                                      8719a1                                           8719a1
Date                                                              12.09.2016                      12.09.2016

And yes i use WebAdmin Access.

Offline zoo

  • Contributer
  • *
  • Posts: 24
  • Country: au
  • Karma: +3/-0
    • View Profile
Re: SIP error message Not Enough License in PBX
« Reply #7 on: May 07, 2020, 04:16:11 PM »
Go to Terminals and check if any created terminals don't have assigned user - if found, delete terminal. This will release used license...If terminal is deleted from User screen - it's not really deleted - just not allocated to the user and will hold the license...

Offline Lock

  • Contributer
  • *
  • Posts: 5
  • Country: pg
  • Karma: +0/-0
    • View Profile
Re: SIP error message Not Enough License in PBX
« Reply #8 on: May 10, 2020, 08:31:12 PM »
@zoo
I have deleted the terminals like you have suggested but still the license error persists.
I have checked the License section and it gives me the following status:


Terminals:                                              License:
MiVoice5300 IP Phones                          1
Mitel SIP Terminals                                 89
SIP Terminals                                          1

I currently have 94 terminals created on the Web client. 91 terminals are registered.
Only 3 are not registered.

Offline bojo387

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 239
  • Country: sg
  • Karma: +3/-0
    • View Profile
Re: SIP error message Not Enough License in PBX
« Reply #9 on: May 11, 2020, 12:06:17 PM »
What's the actual breakdown of your terminals? 94 Mitel SIP or 94 total terminals under System Terminals?  (License is only for 89 Mitel SIP + 1 SIP Terminal)

remove/delete other Mitel SIP terminals until you are at 89...


 

Sitemap 1 2 3 4 5 6 7 8 9 10