« previous next »
Pages: [1]   Go Down

Author Topic: UC Advanced Send to VM  (Read 3050 times)

Offline davohs13

  • Contributer
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
UC Advanced Send to VM
« on: January 07, 2011, 12:05:54 PM »
I am setting up UC Advanced v3.2.15.0 with a 3300 w/mcd 4.1 and Nupoint VM. Everything seems to be working great exept for the "Send to Voicemail" button that is on the popup when an incoming call comes in. All other features such as "Call me and play messages" works. Any suggestions would be great.

Thanks
Logged

Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: UC Advanced Send to VM
« Reply #1 on: January 07, 2011, 12:12:32 PM »
Within the users setup on the UCA server, do you have the voicemail pilot number and the ip address of the NuPoint programmed?
Logged

Offline davohs13

  • Contributer
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: UC Advanced Send to VM
« Reply #2 on: January 07, 2011, 12:14:54 PM »
Yes, I have that information put in.

Thanks
Logged

Offline davohs13

  • Contributer
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: UC Advanced Send to VM
« Reply #3 on: January 07, 2011, 12:18:57 PM »
I have this issue some what figured out. The dialing Prefix number is being added in front of my VM pilot number. Any way around this so that the dialing prefix number will be added to contacts but not the VM number?
Logged

Offline davohs13

  • Contributer
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: UC Advanced Send to VM
« Reply #4 on: January 07, 2011, 12:21:56 PM »
Got it figured out, the VM pilot number is 4 digits and all my ext are 3, changed the setting for ext length to 4 and it is working now.

Thanks
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10