The 3300 CX-II is behind a customer firewall - So I do the following:
1 - Plug my laptop directly into Mitel Network port (so it is no longer on customer network) ;
2 - Set my IP to 10.10.10.2, subnet to 255.255.255.0, gateway blank ;
4 - Join Open Wifi on my Laptop,
3 - connect to customer mitel directly using Internet Explorer at 10.10.10.3 ;
4 - log into Mitel, attempt to license and get Error that it can not contact AMC.
The wifi is open and i have no firewall on laptop. What am I doing wrong? I thought I've done this in the past successfully but it's been a while. Do I need to set a gateway or a specific DNS on the Mitel ?
