Author Topic: unable to change teleworker gateway  (Read 3035 times)

Offline mhumphries

  • Jr. Member
  • **
  • Posts: 87
  • Country: us
  • Karma: +2/-0
    • View Profile
unable to change teleworker gateway
« on: February 15, 2018, 05:03:11 PM »
we have several teleworkers that need to change the teleworker Gateway but it is not allowing them to do that.  it can be enabled/disabled, but not modified.


Offline mcastle

  • Contributer
  • *
  • Posts: 19
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: unable to change teleworker gateway
« Reply #1 on: February 15, 2018, 05:07:20 PM »
On the device themselves or MBG?

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 986
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: unable to change teleworker gateway
« Reply #2 on: February 15, 2018, 06:26:18 PM »
You have to change the gateway on the profile deployment.

Offline mhumphries

  • Jr. Member
  • **
  • Posts: 87
  • Country: us
  • Karma: +2/-0
    • View Profile
Re: unable to change teleworker gateway
« Reply #3 on: February 16, 2018, 11:15:23 AM »
this is the teleworker gateway not the MiCollab Server that i am trying to change.  on the MiCollab Client itself

Offline PC77375

  • Full Member
  • ***
  • Posts: 191
  • Country: us
  • Karma: +6/-0
    • View Profile
Re: unable to change teleworker gateway
« Reply #4 on: February 16, 2018, 11:52:58 AM »
Are these Mitel desk phones or Micollab softphone endpoints? If they are physical desk phone endpoints, then the gateway needs to be changed from the physical device...if I am understanding this correctly, is it the public IP of the MBG that has changed and the endpoints need to be updated to connect to the new IP? What model phones are they?

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 986
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: unable to change teleworker gateway
« Reply #5 on: February 16, 2018, 12:05:12 PM »
as i said , if you talk about the teleworker Gateway in the micollab client setting . you have to change it in the micollab server --> deployement profile.

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: unable to change teleworker gateway
« Reply #6 on: February 16, 2018, 07:25:48 PM »
I have found that the address was sometimes wrong in the MiCollab client and could not be changed from the client itself.

The only way I found to get it to update to the correct address is from the server side.
MiCollab Client Service>Configure MiCollab Client Service>Accounts>{user}>Account Settings>Web RTC Gateway MBG FQDN

Once I added/modified it here it appeared in the client. Just have them restart the client first.

Offline eugenej

  • Full Member
  • ***
  • Posts: 94
  • Country: 00
  • Karma: +2/-0
    • View Profile
Re: unable to change teleworker gateway
« Reply #7 on: February 19, 2018, 07:32:32 AM »
I have found that the address was sometimes wrong in the MiCollab client and could not be changed from the client itself.

The only way I found to get it to update to the correct address is from the server side.
MiCollab Client Service>Configure MiCollab Client Service>Accounts>{user}>Account Settings>Web RTC Gateway MBG FQDN

Once I added/modified it here it appeared in the client. Just have them restart the client first.

Does this setting not only affect the webRTC setting in the web client for MiCollab?
I thought the deployment profile took care of the actual TW settings in the "fat" clients

Offline mhumphries

  • Jr. Member
  • **
  • Posts: 87
  • Country: us
  • Karma: +2/-0
    • View Profile
Re: unable to change teleworker gateway
« Reply #8 on: April 24, 2018, 12:21:36 PM »
so we found that on some clients the Micollab setting forcing the Server address.  once we cleared this we were all good


 

Sitemap 1 2 3 4 5 6 7 8 9 10