Can't join external calls MCD 8.0 PRI trunks

[Crowtalks]

Local government dispatch has caller that needs to speak to a deputy. Dispatch puts the caller on hold and calls the deputy...the deputy calls in to dispatch and when they attempt to join the calls by pressing the "add held call" key they get "CALL BARRED"

I played around with COS bits, to no avail...

I just replaced a Norstar MICS that used the same PRI and they were able to join the calls with the Norstar system, but not the new Mitel 3300

Thanks, Jim

[lundah]

Which COS bits have you tried? Any COR or Interconnect restrictions getting in the way?

[Crowtalks]

I think we figured it out...in System Options Max CO Trunks in a Conference was set at 1. Mitel suggested I set it to 4 and try it...I will let you know...

Jim

[ralph]

I'm pretty sure that you will find that issue in one of the following:
- Interconnect Restriction
- Tenant Restrictions

Ralph

[ralph]

I think we figured it out...in System Options Max CO Trunks in a Conference was set at 1. Mitel suggested I set it to 4 and try it...I will let you know...

Jim

Yep. That too.   

Ralph

[Crowtalks]

As far as interconnect and tenant...all phones are set to 1 and 1

Thanks

[Crowtalks]

The Max Trunk in Conference bit (default of 1) in System Options form was the issue. We set it to 4, tested it and it works.

Jim