Author Topic: Location of the embedded slot on CXi?  (Read 944 times)

Offline Dogbreath

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 396
  • Country: gb
  • Karma: +18/-0
    • View Profile
Location of the embedded slot on CXi?
« on: February 10, 2017, 05:11:58 AM »
Where is the "embedded" slot on a CXi controller?

Looking at a system installed by a since-departed colleague, I see a minor alarm about DSP resources, and in the logs we have:
Code: [Select]
CheckDspCardConfiguration - Unsupported DSP Configuration detected. Quad 21161 MMC modules cannot be placed in the first or second MMC slot. Only the embedded slot is supported on the CX platform.
Is it just a case of shifting the card to a different slot?

Edit: according to About, it's a CXi not a CX.
« Last Edit: February 10, 2017, 05:21:10 AM by Dogbreath »


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Location of the embedded slot on CXi?
« Reply #1 on: February 10, 2017, 11:10:18 AM »
Where is the "embedded" slot on a CXi controller?

Looking at a system installed by a since-departed colleague, I see a minor alarm about DSP resources, and in the logs we have:
Code: [Select]
CheckDspCardConfiguration - Unsupported DSP Configuration detected. Quad 21161 MMC modules cannot be placed in the first or second MMC slot. Only the embedded slot is supported on the CX platform.
Is it just a case of shifting the card to a different slot?

Edit: according to About, it's a CXi not a CX.
On a CX/CXi the DSP card needs to go into hidden slot inside the cover... Slots 1 & 2 are only for external connection cards (PRI and such). You should open the case and move the DSP card to the correct location or it is not being used at all. The technicians handbook covers this topic quite well.


 

Sitemap 1 2 3 4 5 6 7 8 9 10