Author Topic: Firmware version 3 for Mitel 5224 IP Phone  (Read 2909 times)

Offline tifoski

  • New Member
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Firmware version 3 for Mitel 5224 IP Phone
« on: November 21, 2014, 08:46:09 AM »
Hello,

I need to update the firmware on my Mitel IP Phone 5224, which is 2.0 currently. My MCD is at version 6 and thus not updated directly. Need firmware version 3.0 so after that I can update the IP Phone directly by MCD. Can anyone help me? I need the BOOTIP and L2BOOT. Thanks

Best regards,

Lucas Tifoski


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Firmware version 3 for Mitel 5224 IP Phone
« Reply #1 on: November 21, 2014, 09:27:15 AM »
The built-in TFTP server on MCD6 still includes the required boot files for a 5224.

Offline tifoski

  • New Member
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Firmware version 3 for Mitel 5224 IP Phone
« Reply #2 on: November 21, 2014, 12:35:43 PM »
Yes, but the 5224 can not upgrade directly from version 2 to 6. It must be version 3 or higher to update directly. As the 5224 is version 2, i need to update locally to version 3, and after that connect the MCD and upgrade directly. Can help me with version 3?

Thanks,

Lucas Tifoski

Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: Firmware version 3 for Mitel 5224 IP Phone
« Reply #3 on: November 21, 2014, 01:16:27 PM »
Are you talking about SIP firmwares? Because otherwise the answer from lundah would be correct.

Offline tifoski

  • New Member
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Firmware version 3 for Mitel 5224 IP Phone
« Reply #4 on: November 21, 2014, 01:58:25 PM »
I'm talking about BOOTIP and L2BOOT. For if my IP Phone was with version 3 of both, I could directly upgrade to the current version by MCD. However, as it is in version 2, it does not directly updated by the MCD. Would need to upgrade locally by a machine with a TFTP server and after that connect the IP Phone to the MCD to upgrade to the current version. Of 2 for the current not updated, only from the third.

Thanks,

Lucas Tifoski

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: Firmware version 3 for Mitel 5224 IP Phone
« Reply #5 on: November 21, 2014, 07:19:36 PM »
Do you have access to MOL?
You could try and download an old version of 3300 software, maybe release 6 and then extract the IP Phone FW.


 

Sitemap 1 2 3 4 5 6 7 8 9 10