Old MX controller's RAM

[bpone]

Hello
a customer has an old MX controller (Part number:50004190), running software ICP 9.
This controller does not have 512 RAM, so i cannot upgrade it to MCD.
Does anyone know if there is additional RAM i can add to the controller?
Otherwise i will have to replace the controller itself.
Thanks in advance.

     BR/John

[sarond]

Pretty sure you are going to have to get new controller.

Not upgradeable due to being hard soldered.

[bpone]

Thanks very much.

    BR/John

[jrg0852]

I may be wrong, but there is a 256 mod. that you can add to certain systems, but maybe not the MX, that will bring you up to 512. P/N 56005086RC. You'll have to check the hardware man. to see if the MX accepts this. Sorry if it doesn't.

[pmhaynes]

not sure on the age. But i have upgraded a few system by replacing the 256mb module with a 512mb so dimm.
I bought mine from Mitel.
Part numbers are in the release notes/manuals

[lundah]

The ram on the MX is not upgradeable, have to get a new controller.