Author Topic: Freebox analog line configuration  (Read 1964 times)

Offline simon36500

  • New Member
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Freebox analog line configuration
« on: July 01, 2011, 01:47:52 AM »
Hi,

I'm a french user and try to connect the freebox analog line on a LS port behind my ICP.

I configured the analog line with Orange provider informations and the first call return OK but now, each call is blocked? The message from Free say, invalid code?

So I heard that Free blocks call if it detects that it's a IPBX but I don't know how, and I'm not sure....

So is someone have this working or have an idea?

Thanks.


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Freebox analog line configuration
« Reply #1 on: July 01, 2011, 05:57:05 AM »
I don't think that there is any way for Free to know what is connected on the other end of an analog line.
My first guess would be that the PBX didn't hang up.
Try disconnecting the line from the PBX.
Try to call it.  You should get ringing.
If not, wait 15 minutes and try again.

Let us know what happens.

Note: Wikipedia link for Freebox
Ralph


 

Sitemap 1 2 3 4 5 6 7 8 9 10