Author Topic: Digit Mod - Least Cost Routing  (Read 2483 times)

Offline mattwilsonuk

  • Contributer
  • *
  • Posts: 23
  • Karma: +0/-0
    • View Profile
Digit Mod - Least Cost Routing
« on: December 05, 2010, 11:25:04 AM »
Hi Guys...

Got a bit of a problem we cant seem to figure out.

I have 1 pbx with ISDN 30 connected.  I have an 0844 number routed into this PBX to a Path.
When users on thie PBX dial the 0844 number I dont want them going down TDM Trunks - have tried digit mod but this still wants to push the call down a trunk - is there anyway I can keep this internal?

Cheers

Matt


Offline mattwilsonuk

  • Contributer
  • *
  • Posts: 23
  • Karma: +0/-0
    • View Profile
Re: Digit Mod - Least Cost Routing
« Reply #1 on: December 05, 2010, 12:50:57 PM »
Done it with a Loopback - Read some of the other posts - Thanks Ralph ;-)

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Digit Mod - Least Cost Routing
« Reply #2 on: December 06, 2010, 09:16:49 AM »
That must have been an earlier post from me about the loop back.   
It's a cool trick for those who can pull off the programming.

Ralph
www.statewidetelecom.com

Offline Chakara

  • Hero Member
  • *****
  • Posts: 607
  • Karma: +2/-0
    • View Profile
    • Kyle Petree
Re: Digit Mod - Least Cost Routing
« Reply #3 on: December 06, 2010, 10:11:34 PM »
  Link?

-Chak

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Digit Mod - Least Cost Routing
« Reply #4 on: December 07, 2010, 08:34:27 AM »
Sorry Chak,
I went looking for the post where I talked about it and couldn't find it.   I know I did but can't remember where. (Might have been on another forum)
Hopefully Matt can shed some light on it.

Ralph
www.dodgetruckspotlight.com


 

Sitemap 1 2 3 4 5 6 7 8 9 10