Author Topic: Setting a Direct Dial  (Read 992 times)

Offline philellis

  • Contributer
  • *
  • Posts: 9
  • Country: gb
  • Karma: +0/-0
    • View Profile
Setting a Direct Dial
« on: June 26, 2018, 10:44:33 AM »
Hi,

Does anyone have a quick guide to setting a direct dial up on a mitel controller? I've recently taken over a mitel system and im not 100% sure on this.

Thanks for any help,

Phil


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4100
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Setting a Direct Dial
« Reply #1 on: June 26, 2018, 02:47:14 PM »
Hi,

Does anyone have a quick guide to setting a direct dial up on a mitel controller? I've recently taken over a mitel system and im not 100% sure on this.

Thanks for any help,

Phil
That's pretty vague, but I assume you mean a DID/DDI number? There are multiple ways to set this up on a controller... Have the device be the same extension as the DID digits, use the DID Call Routing Table, use system speed call, use add/remove digits of the trunk group, etc. It is really hard to give a quick n dirty reference not knowing which method(s) are being used.


 

Sitemap 1 2 3 4 5 6 7 8 9 10