Author Topic: Outgoing calls showing private number - Mitel 3300 ICP  (Read 3323 times)

Offline synthesis

  • Jr. Member
  • **
  • Posts: 74
  • Country: za
  • Karma: +1/-0
    • View Profile
Outgoing calls showing private number - Mitel 3300 ICP
« on: August 28, 2017, 04:15:41 AM »
Hello. I have noticed while administering the Mitel 3300 ICP that when a user makes an outbound call (via a PRI interface), sometimes the person receiving the call will see the outgoing call ID as showing private number for the call, while other times the call ID will show the outgoing number. Is there a setting that can ensure that all outgoing calls always show the outgoing phone number and not private number?


Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 693
  • Country: us
  • Karma: +17/-0
    • View Profile
Re: Outgoing calls showing private number - Mitel 3300 ICP
« Reply #1 on: August 29, 2017, 03:33:13 PM »
Is there anything in common when people receive the blocked caller ID? Cell phones? Carrier maybe?

Offline august

  • Sr. Member
  • ****
  • Posts: 258
  • Country: ca
  • Karma: +9/-0
    • View Profile
Re: Outgoing calls showing private number - Mitel 3300 ICP
« Reply #2 on: August 29, 2017, 08:21:57 PM »
In the ARS, check the digit dial to see the route the call will used..  Then check the digit mod.  Look for {000} or {001}.  {000} allow outgoing number while {001} block the number.

It will be setup like this if configure for call by call instead of same thing for all calls.

Offline Giltner

  • New Member
  • *
  • Posts: 1
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Outgoing calls showing private number - Mitel 3300 ICP
« Reply #3 on: November 08, 2017, 08:10:00 AM »
Thanks Auguest, that worked.


 

Sitemap 1 2 3 4 5 6 7 8 9 10