« previous next »
Pages: [1]   Go Down

Author Topic: Unused DDI's?  (Read 1110 times)

Offline rm4g00

  • New Member
  • *
  • Posts: 1
  • Country: gb
  • Karma: +0/-0
    • View Profile
Unused DDI's?
« on: July 19, 2016, 05:26:27 AM »
Hello guys/gals,

Does anyone know a method to check for unused DDI's? ie last logged in or a command via the maintenance module to cross reference an old account for usage for a new user?

Thanks alot,

Rm4g00

   

Release level: 6.0 SP1
    Active software load: 12.0.1.24
    Inactive software load: Not available.
    System relink: No relink has been applied.
    Call Control relink: No relink has been applied.
    Platform: MXe, 512MB of RAM
Logged

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Unused DDI's?
« Reply #1 on: July 19, 2016, 08:04:46 AM »
If your DID range is, for example, 1000 to 1999, then in maintenance enter this command:
Loc all fre dn 1000 to 1999

it will show you the unused numbers in that range.

Ralph
Logged

Offline VinceWhirlwind

  • Hero Member
  • *****
  • Posts: 899
  • Country: au
  • Karma: +31/-0
    • View Profile
Re: Unused DDI's?
« Reply #2 on: July 19, 2016, 08:55:44 PM »
Something I've been meaning to find out for sure and write down in my support manual:
When you run the above command, what numbers are not shown that could potentially be in use in other ways?
Multiline keys?
Single line keys?
System speed calls?
...?
Logged

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Unused DDI's?
« Reply #3 on: July 20, 2016, 08:15:35 AM »
It shows all unused numbers within the range.
If it's on a button, speed dial or ARS then it will not show it.

Ralph
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10