Author Topic: Remove SX2000 Light Per cab from the system  (Read 1151 times)

Offline JoeMatthews

  • New Member
  • *
  • Posts: 4
  • Country: gb
  • Karma: +0/-0
    • View Profile
Remove SX2000 Light Per cab from the system
« on: May 20, 2016, 02:34:19 PM »
Dear all,
Some advice on how to correctly remove the SX2000 cab from the 3300 would be really helpful.
I *think* I have identified the page where I would remove it but I am not sure and do not want to do something which might cause issues.
No analogue lines are connected to the cab anymore and I have disconnected the 9 cables going to the wall boxes where they used to be patched in to analogue phone.
The per cab is connected via fibre connection to the 3300 and I have tried disconnecting the fiber for a couple of minutes to see what the warning where to determine where to look.

The screen shot below shows the page I think I just select and delete the per cab (Sx2000).



Any help would be much appreciated!
Joe


Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: Remove SX2000 Light Per cab from the system
« Reply #1 on: May 20, 2016, 02:58:28 PM »
That's the correct page, but have you unprogrammed all the cards in the Card Assignment form? If not, it won't let you remove the cabinet.

Offline JoeMatthews

  • New Member
  • *
  • Posts: 4
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: Remove SX2000 Light Per cab from the system
« Reply #2 on: May 24, 2016, 06:48:44 AM »
Many thanks, that's really helpful. Noticed I also have some analogue numbers used for call menu's etc which I'll need to move off.


 

Sitemap 1 2 3 4 5 6 7 8 9 10