Multi color LED for line indicators

[unclejemima]

Are any of the buttons on 5000 compatible devices (5320, 5330, 5340's) multi color LED's?

Right now we are wishing we could tell what analog line was on hold, vs the call ringing.

Our old panasonic system would make the line LED change color when we placed the call on hold so we could differentiate between a new call and what was placed on hold?

Is this an option on the 3300?

Thanks!

[lowradiation]

If its a 5000 then you have red and green for 5320,30,40 phones (top three keys on 5320 phones do not have any light)
System Flags used are:
1. Allow Green LEDs
2. Use Green LEDs for Direct Rings

[unclejemima]

Thanks for the reply.

Right now all our lines are red/orange.  How do I get the green LED to show when new calls are coming in and/or if calls are on hold?

Thanks!

[Tech Electronics]

Unclejemima,

Well as lowradition has explained go to: System > Flags > Allow Green LEDs & Use Green LEDs for Direct Rings: Yes

Once that is done though the Call Keys will start to use Green LEDs on the phones, but putting them on Hold on a Call Key doesn't change the color to red/orange; it stays green on that phone.

Now if this is a Key System then it would most likely work out since a direct ring would be Green for all phones the call is offered to and anyone who put one of the lines on hold would show up on the other phones as Red/Orange.

Hope that helps explain things a little better.

Thanks,

TE

[unclejemima]

That works epic.  Thanks guys!