Author Topic: Help looking for sip firmware for Mitel 5320 phones  (Read 3641 times)

Offline mattflauntel

  • New Member
  • *
  • Posts: 1
  • Country: au
  • Karma: +0/-0
    • View Profile
Help looking for sip firmware for Mitel 5320 phones
« on: August 27, 2015, 07:12:10 PM »
Hi I was wondering if someone here might have access to the SIP firmware for the Mitel 5320 phones or could advise on the best approach


Offline ipatt1993

  • New Member
  • *
  • Posts: 4
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Help looking for sip firmware for Mitel 5320 phones
« Reply #1 on: September 30, 2015, 09:45:44 AM »
Hi there.

I know this is an old thread, but if you're still looking - the firmware for the 5330 should work for the 5320.

Offline Gasmanz

  • Jr. Member
  • **
  • Posts: 37
  • Country: nz
  • Karma: +1/-0
    • View Profile
Re: Help looking for sip firmware for Mitel 5320 phones
« Reply #2 on: October 19, 2015, 05:38:42 PM »
Are you looking for firmware to upgrade the phone or just convert it to SIP?

As far as I know and have experienced, the 5320 phones are dual mode so there is a standard SIP mode built in.

1. Disconnect the power from the set.
2. Hold down the "*Superkey*" while powering up the set.
3. The set will come up and ask if you want to CONFIGURE PHONE? select YES.
4. "NETWORK PARAMETERS?" select NO
5. "HARDWARE CONFIG?" select NO
6. "PHONE MODE?" select YES
7. "PROTOCOL?" select YES
8. "PHONE MODE: Minet" select Change
9. Select "SIP", "Accept" and confirm with "Yes". It will now save the settings to NVram
10. "REBOOT NOW?" select Yes

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: Help looking for sip firmware for Mitel 5320 phones
« Reply #3 on: October 19, 2015, 10:21:46 PM »
Or the quicker way is to reboot the phone and hold down * and 7.


 

Sitemap 1 2 3 4 5 6 7 8 9 10